 |
 Related Products
|
|
|
|
Take Out Kit
by United Chemical
| | 1 Kit | $41.93 | Out Of Stock |
|
Used to convert biguanide pools back to chlorine without all the hassles.
Kit contains 1 Quart of TakeOut and 1 Quart of No Mor Problems.
MANUFACTURER'S DIRECTIONS FOR USE:
It is a violation of federal law to use this product in a manner inconsistent with labeling. Always add Take Out directly to pool.
TO CONVERT POOLS FROM TREATMENT WITH BIGUANIDE,BAQUACIL OR SOFTSWIM TO IONIZATION TREATMENT OR TREATMENT WITH CHLORINATING OR BROMINATING COMPOUNDS:
STEP 1: Add 2 lbs Pool Stain Treat per 15,000 gallons of pool water. Ignore Step 2 of the Pool Stain Treat Directions For Use; follow all other Directions For Use. Pool Stain Treat may be added with or without the pump running.
STEP 2: Add 32 fluid ounces Take Out per 15,000 gallons of water.
STEP 3: Follow the use instructions on the label of an EPA registered chlorinating product (such as trichloro-s-triazinetrione or sodium hypochlorite). Maintain no more than an 0.3 ppm chlorine or bromine residual.
STEP 4: Once a week:
A.) Make sure there is still chlorine feeding the pool, one tablet at a time(0.3 ppm or less) per 20,000 gallons water.
B.) Add No Mor Problems (EPA Reg. No. 45337-11) as described in the Directions For Use for maintenance treatments on the label for Nor Mor Problems.
C.) Check the Biquanide, Bacquacil, or Softswim level.
STEP 5: When the Biguanide, Bacquacil or Softswim level drops to 0.0 ppm, increase the chlorine level to 0.5 ppm.
STEP 6: Fill a clean bucket with approximately 1 gallon of water. Add 1 teaspoon of a chlorine shock treatment product. If the water in the bucket turns color, go back to Step 3. If the water stays clear, go to Step 7.
STEP 7: When the Biguanide, Bacquacil or Softswim level drops to 0.0 ppm at all times for 2-3 weeks, the pool may be maintained using No Mor Problems in addition to chlorinating or brominating compounds. Follow the Directions For Use for these products.
NOTE:
If the pool starts to turn yellow or brown, this indicates a false biguanide reading. Go back to Step 3 for 2-3 more weeks. Wait 1 hour before entering pool. Observe the required waiting period for the chlorinating or brominating product used with Take Out if greater than 1 hour. |
|
|
|
|
|
|