 |
 Related Products
|
Removit
Stain/Scale Control
Pool Stain Treat
Stain Tamer
Scale Treat
|
|
|
Stain Remover
by Omni
| | 2 LB | $18.60 | Out Of Stock |
|
OMNI STAIN REMOVER consists of a multiple acid formulation found to be extremely effective in removing both metal and mineral stains from vinyl, fiberglass, plaster and tile pool surfaces. This product may not be used on acrylic spa surfaces.
DIRECTIONS FOR USE
WATER BALANCE: For best results balance the pool water before using this product. For best
results, add this product when the chlorine level is below 0.5 ppm. After 36 hours the chlorine level may be increased to the normal operating range.
DOSAGE: For mild and recently acquired stains, use 1 1/4 pounds per 10,000 gallons of pool water. If the stains are severe and have been present for some time, it may be necessary to increase the dosage to 2 pounds per 10,000 gallons of water.
APPLICATION: Wearing rubber gloves, predissolve STAIN REMOVER in approximately 4 (4)
gallons of water in a 5 gallon plastic pail. Slowly pour this solution into the pool water around the edge of the pool. For stubborn stains in local spots, sprinkle STAIN REMOVER directly over the problem areas. Wear rubber gloves for protection when handling.
FINAL STEP: Add full dose of Omni Stain & Scale Control one hour after OMNI STAIN REMOVER treatment to prevent return of the stains. DO NOT APPLY A SHOCK PRODUCT TO THE POOL FOR 4 DAYS AFTER APPLYING OMNI STAIN REMOVER.
|
|
|
|
|
|
|