 |
 Related Products
|
Liquid Ph Down
Liquid Spa Up
Ph Balance
Spa Decrease
Perfect Ph
|
|
|
Ph Increaser (Spa)
by Omni
| | 18 Oz | $3.56 | Out Of Stock |
| | 2 Lb. | $5.99 | Out Of Stock |
|
SPA ESSENTIALS pH INCREASER raises the pH of water in spas and hot tubs. The pH should be maintained at 7.2 to 7.6 (as measured by an accurate test method). A low pH can cause eye irritation, strong chemical odor, rapid sanitizer loss and corrosion of metal in the filtration system.
MEASUREMENT AND DOSING: Use all level measurements. 1 capful=2 teaspoons;
3 teaspoons=1 tablespoon.
DIRECTIONS FOR USE
1. Use an accurate test method to determine pH.
2. Using the chart below and pH test results determine the required amount of this product needed to adjust the pH to maintain a reading of 7.2 to 7.6.
3. With pump running on high speed, sprinkle the required amount of pH INCREASER into the spa water and continue running the pump for 30 minutes.
4. Retest pH and adjust as necessary.
5. A good maintenance habit is to test for Acid/Alkali demand periodically.
SPA CAPACITY (gallons)
-----------Less than 7.2 pH-------7.2 pH--------7.3 pH
100------------- 2 Tsp ------------1 Tsp-------1/2 Tsp
200 ------------ 3 Tsp ------------2 Tsp -------1 Tsp
300 ------------ 4 Tsp ------------3 Tsp ----1 1/2 Tsp
400 ------------ 6 Tsp ------------4 Tsp--------2 Tsp
|
|
|
|
|
|
|