 |
 Related Products
|
Tlc Cleaner
Aquapill - Odor Eliminator
Natural Clear (Enzyme Scum)
Sea-Klear All Purpose Cleaner
Ez Filter Cleaner
|
|
|
Clear Comfort Filter Cleaner
by Omni
| | 1 QT. | $11.62 | Out Of Stock |
|
Pools on the CLEAR COMFORT system maintain superior clarity due to CLEAR COMFORT'S
ability to take out dirt, oils and solids from the water and deposit them on the filter. Therefore, it is CRITICAL that CLEAR COMFORT filters be chemically cleaned when opening and closing the pool, and every 6 weeks during the swimming season. Clogged filters can seriously reduce water flow through the filter resulting in hazy or cloudy water.
CLEAR COMFORT FILTER CLEANER is the only filter cleaner specially formulated to remove dirt, oils, dead algae and other filter clogging deposits from sand, D.E., and cartridge filters from biguanide treated pools. Its use also helps extend the life of your filter's media.
Read entire label and use strictly in accordance with hazard warnings and directions.
DIRECTIONS FOR USE
SAND AND MOST D.E. FILTERS: Backwash thoroughly. Turn pump off. For most effective results, remove lid from lint pot and pour 1 quart of this product into the pot (If this is not possible, pour the product into the skimmer closest to the filter). With filter in backwash position, turn pump on for 5-10 seconds or until a slight pink color is seen in site glass or filter discharge. Turn pump off and turn valve to the closed position, if available. Let filter cleaner soak for 12-24 hours before backwashing. Backwash filter for at least 2 minutes or until site glass or the filter discharge water is clear of color, dirt, and debris. Rinse and return to normal operation.
NON BACKWASHABLE D.E. AND CARTRIDGE FILTER: Turn pump off. Remove elements from filter and rinse off debris with a high pressure hose. Immerse completely and soak 12-24 hours in a clean plastic bucket containing 1 quart of this product in 5 gallons of water for small filter elements or 2 quarts to 10 gallons of water for large filter elements. Clean and rinse thoroughly with water using a high pressure hose. Replace elements and resume normal operation. For best performance, allow D.E. filter septum or cartridge elements to completely dry before replacement.
|
|
|
|
|
|
|