 |
 Related Products
|
Crystal Clear Multi Shock
Super Charge
Quick Clear
Sea-Klear Chlorine Free Shock
O2 Safe Shock
|
|
|
Breakout 60
by Omni
| | 5 LB | $29.50 | Out Of Stock |
| | (Cs) 4x5 LB. | $116.45 | Out Of Stock |
|
FOR SWIMMING POOL SUPERCHLORINATION
BREAKOUT 60 is 97% sodium dichloro-s-triazinetrione and restores water sparkle and comfort by destroying harmful bacteria and algae and non-filterable swimmer wastes such as perspiration and suntan oils. These wastes can cause cloudy, dull water, eye irritation and strong odors. Regular use of BREAKOUT 60 in chlorine sanitized pools destroys bacteria and swimmer wastes maintaining sparkling, clean clear water.
DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Read entire label and use strictly in accordance with precautionary statements and directions.
Ensure all pool equipment is working properly. Backwash the filter system following manufacturer's directions. Adjust pH to between 7.2-7.6. In chlorine treated pools, add stabilizer to establish a minimum stabilizer level of 30-40 ppm to reduce the degradative effects of sunlight upon the chlorine residual. Do not add stabilizer to bromine treated pools. Before using this product check for metals and if present, add stain and scale inhibitor to prevent staining of pool surface due to metals. When using other products as outlined in the directions for this product, always follow directions on those products.
APPLICATION METHODS
With the pool pump in operation, broadcast the product evenly into the deep end of the pool. In potentially bleachable surface pools such as vinyl, paint, fiberglass, or colored plaster, brush the pool after application to ensure complete dissolving of the product's active ingredient. NEVER ALLOW UNDISSOLVED PRODUCT TO REST IN CONTACT WITH BLEACHABLE POOL SURFACES.
In water temperatures less than 70 degrees F, or as an alternate application procedure, predissolve this product prior to applying evenly to the deep end of the pool. Dissolve BREAKOUT 60 outdoors, in a clean plastic bucket stirring with a clean plastic or wooden spoon. Add this product to water, NEVER add water to product. NEVER add more than 1 pound of this product to less than 3 gallons of cool water. Do not mix with other products when predissolving.
FOR WEEKLY APPLICATION INTERVALS IN SWIMMING POOLS: Add 1 lb.
(see Application Methods) of this
product per 20,000 gallons of water into the deep end of the pool, when the pool is not in use (preferably at night). Reapply after heavy rain showers or following heavy bather loads.
FOR TWO WEEK APPLICATION INTERVALS IN SWIMMING POOLS: Add 1 lb. (see Application Methods) of this product per 10,000 gallons of water into the deep end of the pool every other week when the pool is not in use (preferably at night). Reapply after heavy rain showers or following heavy bather loads.
REENTRY INTO TREATED SWIMMING POOLS IS PROHIBITED ABOVE LEVELS OF 3PPM CHLORINE DUE TO RISK OF BODY INJURY.
|
|
|
|
|
|
|