 |
 Related Products
|
Pool Magic Spring & Fall
Robacide 30
Algae Destroyer
Algimycin 2000
Strike Out
|
|
|
Algaecide 10
by Omni
| | 1 QT. | $4.15 | Out Of Stock |
|
SWIMMING POOL ALGAE PREVENTATIVE
This economical product is formulated to complement swimming pool water being treated with traditional chlorine or bromine systems. It is effective in preventing most common algae growth and aids in maintaining pool water clarity. ALGAECIDE 10 may foam and therefore should not be used for spa treatment or in pools with attached spas or jetted returns.
DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Read entire label and use strictly in accordance with precautionary statements and directions.
Ensure all pool equipment is working properly. Backwash the filter system following manufacturer's directions. Adjust pH to between 7.2-7.6. In outdoor chlorine treated pools, add stabilizer to establish a minimum stabilizer level of 30-40 ppm to reduce the degradative effects of sunlight upon the chlorine residual. Check for metals and if present add a stain and scale inhibitor to prevent staining of pool surface due to metal. Maintain sanitizer residual in accordance with label directions found on your sanitizer. When using other products as outlined in directions for this product, alway follow directions on those products.
INITIAL APPLICATION: For an initial application, pour directly into pool at a rate of 1/2 gallon of this product per 25,000 gallons of water (this will provide 2 ppm of ALGAECIDE 10 in the water). More rapid distribution will be achieved by pouring a portion of the specified amount into several areas of the pool until all of the required quantity has been added. Recirculation will assure rapid dispersion.
MAINTENANCE: Pour directly into pool at a rate of 3.2 fluid oz. per 5,000 gallons of water every 5-7 days depending on weather and use factors (this will provide 0.5 ppm of ALGAECIDE 10 in the water). After each rain of consequence, add 3.2 fluid oz. per 5,000 gallons of water. Even when the pool may not be in use for periods of time, algicide additions should be made since a heavy accumulation of algae growth may be difficult to remove. The appropriate amount of ALGAECIDE 10 should be added by pouring a portion of the specified amount into several areas of the pool until the required quantity has been added. Recirculation will assure rapid dispersion. |
|
|
|
|
|
|