 |
 Related Products
|
Pool Magic Spring & Fall
Pink Cure
Algimycin 2000
Phosphate Remover (Zero Phos)
Algaetrine
|
|
|
Algae Terminator
by Omni
| | 1 QT. | $24.34 | Out Of Stock |
|
SWIMMING POOL ALGAECIDE AND ALGAE PREVENTATIVE:
ALGAE TERMINATOR is highly effective, patented, non-staining algaecide that kills and controls all types of algae in swimming pools. ALGAE TERMINATOR is especially recommended for killing and controlling green, blue-green (frequently called black or spot algae) and mustard algae growths. ALGAE TERMINATOR is formulated for use in chlorine or bromine sanitized swimming pools of all surface and filter types.
IMPORTANT NOTES: (1)Do not use in pools sanitized with biguanides or pools treated with hydrogen peroxide. (2) Prior to the initial application, test pool water for the presence of metals. If metals are present, apply a metal stain preventative per label directions. (3)When using other products, always follow directions for those products. (4)This product is non-staining to pool surfaces and equipment.
DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Read entire label and use strictly in accordance with precautionary statements and directions.
PRIOR TO APPLICATION:(1)Ensure all equipment is working properly. If necessary, clean the filter system. (2) Adjust pH between 7.2-7.6. (3)Establish and maintain proper chlorine or bromine levels. In chlorine-treated pools, add stabilizer to establish a minimum level of 30-40 ppm of cyanuric acid to reduce the degrading effects of sonlight on chlorine residual.(4) Vacuum leaves and any other foreign debris from pool.(5) Brush visible algae thoroughly from the pool's surface with a surface-compatible brush.
TO PREVENT ALGAE: (1)Initially apply 8 fl. oz. of ALGAE TERMINATOR per 10,000 gallons of pool water with pump and filter operating. (2) Thereafter, for weekly application intervals,add 1.5 fl. oz. per 10,000 gallons of pool water. For two week application intervals, add 3 fl.oz. per 10,000 gallons of pool water every other week. Apply more often if pool volume is diluted by heavy rain, frequent backwashing or partial drain/refill.
TREATMENT OF VISIBLE ALGAE: (1) Add 1 lb. of Breakout per 10,000 gallons of pool water or 1 lb. of Breakout 35 per 6,000 gallons of pool water. Follow application directions on these products.(2)Allow to circulate for 1 hour.(3)With pump and filter operating, apply 16 fl. oz. of ALGAE TERMINATOR per 10,000 gallons of pool water directly to the pool water in areas of heaviest algae growth.(4)Continuously circulate pool water for 24 hours.(5)The nest day, thoroughly brush pool surfaces.(6) In cases of persistent algae, repeat brushing and application after 2-4 days.(7)The use of a filter aid will enhance filter efficiency and algae removal. |
|
|
|
|
|
|