 |
 Related Products
|
Spa Frog Floating System
Brominating Concentrate
Spa Frog Cartridge Kit
Spa Frog Mineral Cartridge
Spa Brominating Tablets
|
|
|
Nature2 Spa Purifier Cartridge
by Zodiac Pool Care
| | 1 Cartridge | $24.99 | Out Of Stock |
| | 2-Pack | $46.99 | Out Of Stock |
| | 4-Pack | $87.99 | Out Of Stock |
|
The Nature 2 Spa Purifier is now rated by the EPA as an effective sanitizer and isThe Natural Alternative to Chlorine
Lasts four months
Makes spas easy to manage, halogen-free using silver ions to zap bacteria
Improves performance of ozone-equipped spas
Assures an odor-free spa
Significantly improves look & feel of water
Simplifies water balance — it is unaffected by heat
9 out of 10 spa users prefer the Nature2 spa stick over their old method
Specifications:
Capacity: for spas up to 500 gallons
Run time: minimum 4 hours daily
Flow rate: works with all spa flow rates
Installation: Drops into the core of most spa filters, works with suction-side and pressure-side filters
| Spa Recipe Ingredients
• Nature2Purifier
• Non-chlorine oxidizer (potassium peroxymonosulfate)
• Nature2 Spa Test Strips** or Test kits (pH, total alkalinity)
• pH and total adjusting chemicals
• Dichlor
| When: | What to do: | |
Purifier Start Up | Drain and refill your spa. Balance water per dealer guidelines. Add 1 teaspoon of dichlor (spa chlorine) to spa per 250 gallons (approx. 1000 litres). (Note: 1 teaspoon = 1/4 ounce = 7 grams.) | | Every Day | Run spa according to recommendation supplied to you by the manufacturer of your spa | | Before Each Use | Add 1 tablespoon of Spa Shock (potassium peroxymonosulfate or MPS) to spa per 250 gallons (approx. 1000 litres)
(Note: 1 tablespoon = 1 tablet = 3/4 ounce = 21 grams.) A convenient way to insure proper MPS level is to use a Nature2 Spa Test Strip. If the Nature2Spa Test Strip indicates a low level of MPS, add 1 tablespoon of MPS to spa per 250 gallons and retest. | | Once A Week | Add 3 tablespoons of potassium peroxymonosulfate to spa per 250 gallons (approx. 1000 litres). Check and adjust pH and total alkalinity. A convenient way to check pH and total, alkalinity levels is to use a Nature2 Spa Test Strip. | | Every 4 Months | Drain and refill your spa.
Replace Nature2 purifier, repeat purifier start-up. | | As Needed | If water looks hazy, shock treat with 1 teaspoon of dichlor per 250 gallons (approx. 1000 litres) |
|
Important
The Nature2 Spa Purifier is not to be used with products containing bromine, sodium bromide or biguanides. If these products are being used, be sure to drain and refill spa with fresh water.
Note:
• As an alternative to potassium monopersulfate, dichlor may be substituted:
1 teaspoon dichlor = 3 tablespoons potassium peroxymonosulfate.
• The use of an efficient ozone generator with Nature2 may reduce the need for supplemental chemical treatments.
* Potassium peroxymonosulfate may cause a lowering of the pH and total alkalinity of your spa water. Please monitor pH and total alkalinity at least once per week and adjust accordingly.
Call 1-888-537-6657 for more information.
This information is copyright by Zodiac Pool Care, Inc. |
|
|
|
|
|
|
|
|