 |
 Related Products
|
Nature 2 Express Kit - Inground Pool
Nature 2 Pool Replacement Cartridge - A Series
The Bright Stuff
Clear Blue
Nature 2 Pool Replacement Cartridge - M Series
|
|
|
Nature 2 Pool Replacement Cartridge - G Series
by Zodiac Pool Care
| | N2CG25 | $85.99 | Out Of Stock |
| | N2CG35 | $89.99 | Out Of Stock |
| | N2CG45 | $95.99 | Out Of Stock |
|
FREE Shipping & Handling for Orders Over $50
What you see is what you pay with Focuspools.com
LIMITED Models
| Nature2 Mineral Cartridge Start-Up Instructions - Before Installing and starting up a new Nature2 Cartridge, clean debris and algae out of the pool and clean pool filter.
Important: Do not install the new cartridge until the pool water is chemically balanced.
-
Balance pool water:
All swimming pools, including Nature2 pools, require properly balanced water.
• pH: 7.4 - 7.8
• Total Hardness: 200 - 400 ppm
• Total Alkalinity: 80 - 150 ppm Consult your Nature2 dealer for specific water balance instructions.
- Install the Nature2 cartridge into the purifier.
- Superoxidize (shock) the pool:
On the first day, superoxidize water with 1 lb. dry or 1 gallon liquid chlorine per 10,000 gallons of water to burn off contaminants and to activate the cartridge.
Important: Initial superoxidation with chlorine is required.
- Activate the Nature2 cartridge:
• Run the pump and filter system 24 hours per day for 4 days or
• Run the pump and filter system 6 hours per day for 14 days or
- Maintain a 1-2 ppm residual free chlorine level throughout the 4 day or 14 day activation period.
- Let the free chlorine level drop to 0.5 ppm when the Cartridge Activation period is complete.
- Follow the Low Chlorine Maintenance Recipe (see below).
- Enjoy your Nature2 purified pool!
Nature2 Low Chlorine Maintenance Recipe
Ingredients:
• Nature2 purifier
• Chlorine
• pH & Total Alkalinity adjusting chemicals
• Total Hardness increaser, if needed
• Water Test Kit
• Cyanuric acid
Once the 4-day or 14-day Cartridge Activation Period is completed, let the chlorine level drop to 0.5 ppm by reducing the amount of chlorine you add then:
| When: | What to do: | | Everyday | Run the pump and filter system at least 6 hours daily. | | Once a week | Balance the pH and Total Alkalinity. | | Twice a week | Check the free chlorine residual, add chlorine to maintain a 0.5 PPM. | | As needed | If the water starts to look hazy, superoxidize (shock) using 1lb. of chlorine granules or 1 gal. liquid chlorine or 1 lb. non-chlorine oxidizer per 10,000 gallons of water. Add cyanuric acid to maintain 50 ppm. After heavy use or rainstorms, superoxidization is recommended. |
|
|
Professional G CartridgeManual.pdf
Manufacturer Part Numbers W28125, W28135, W28145
O-Ring - 1 Piece Cap
O-Ring 2-Piece Locking Cap |
|
|
|
|
|
|