 |
 Related Products
|
Pool Stain Treat
Clear Comfort Stain Control
Yellow Out
The Purple Stuff
Scale Treat
|
|
|
Sequasol
by GLB Pool & Spa
| | 1 QT. | $13.94 | Out Of Stock |
| | (Cs) 12x1 QT. | $161.91 | Out Of Stock |
|
SEQUA-SOL provides protection against scale, stains and rust caused by minerals in the water such as iron, copper, nickel, manganese, silicon and zinc. SEQUA-SOL is stable in water at high temperatures. This insures protection of all equipment and is especially effective on the heat exchange elements of swimming pool heaters.
DIRECTIONS FOR USE:
WHEN TO USE
SEQUA-SOL can be added to your pool water at any time during the swimming season. It is most important to add SEQUA-SOL when your pool is returned to normal operation in the beginning of the season or when your pool is initially filled.
1. When a pool is initially filled, SEQUA-SOL should always be added because fresh water supplies usually contain stain and scale producing minerals such as iron, copper, manganese and calcium. For best results, add the required amount of SEQUA-SOL at the time you start to fill the pool, not after the pool filled. After SEQUA-SOL has been added and the pool filled, filter and circulate the water at least overnight before adding chlorine or other pool chemicals to allow SEQUA-SOL to react with and prevent precipitation of minerals in fresh water.
2. When SEQUA-SOL is added to a pool that is already filled and in use, chlorine and other pool chemicals may be added immediately. SEQUA-SOL is completely compatible with chlorine and other pool chemicals.
3. For the inital treatment, add 16 fl. oz. per 10,000 gallons of water of normal hardness and mineral content. If the water is extremely hard (over 200ppm) or has high iron, copper or manganese content (over 0.1 ppm) double the initial dosage. Use 32 fl. oz. per 10,000 gallons of water.
4. For preventative maintenance, following the initial treatment, add 4 fl. oz. per 10,000 gallons of pool water once a week, to take care of make-up water. |
|
|
|
|
|
|