 |
 Related Products
|
Bug Out
Aquapill - Pipe Clear
Filter Cleaner And Degreaser
Dissolve
The Clean Stuff
|
|
|
Filter Cleanse
by GLB Pool & Spa
| | 2 LB. | $14.26 | Out Of Stock |
| | 20 LB. | $125.68 | Out Of Stock |
|
FILTER CLEANSE contains a color indicator which acts as a guide for proper application. The
FILTER CLEANSE solution is red when active. The solution will turn orange or yellow when it is no longer active. Add just enough FILTER CLEANSE to turn the solution red again if further cleaning is necessary.
WATER CARE TIPS
- Clean the filter early in the spring to remove winter debris and after a period of intense use.
- Use routinely once every month or two during season to maintain efficient operation.
- Follow manufacturer's directions on filter for instructions on how to remove the filter elements or how to isolate the filter.
HOW TO MAKE FILTER CLEANSE SOLUTION
Use a large plastic pail. Dissolve 1 lb. in 5 gallons of lukewarm water, stirring with a wooden stick until the solution turns dark red and the FILTER CLEANSE is totally dissolved. Determine the capacity of the filter tank by the manufacturer's label and make enough solution to cover the elements or the sand.
HOW TO USE FILTER CLEANSE:
CARTRIDGE FILTERS AND REMOVABLE D.E. ELEMENTS:
Stop filtration and drain all water from filter. Remove elements and soak overnight in sufficientFILTER CLEANSE solution to cover. DO NOT USE GALVANIZED ALUMINUM OR PORCELAIN CONTAINER FOR SOAKING. Remove filter elements from solution, drain, rinse thoroughly with warm water until clear and replace in filter. Start pump and fill filter with clear water.
SAND FILTERS AND FILTERS WITHOUT REMOVABLE ELEMENTS:
Backwash filter, then shut off pump and remove hair and lint pot cover. Drain filter. Turn on pump, making certain that handle is in backwash position and slowly pour FILTER CLEANSE solution into hair and lint pot and with pump running. Do not allow pump to run dry. Continue adding FILTER CLEANSE until sand or elements are covered. Shut off pump at once, leave in backwash position and allow to stand overnight(12 hours.) Backwash until water coming from backwash line is clear. Do not allow solution to get into pool. Start pump and fill filter with clear water.
|
|
|
|
|
|
|